In this year’s CIPPE Oil Show, GN Solids Control’s centrifuge family also attended and got lots of eyeballs, from the 9 inch diameter bowl baby centrifuge GNLW223, with 3800RPM rotating speed, to GNLW553 big bowl centrifuge with 22 inch diameter bowl, all GN solids control centrifuge models give a perfect show in CIPPE. Among those decanter centrifuges, the medium size one, GNLW363, is still the most popular option.
GNLW363 Decanter centrifuge is a 14 inch bowl decanter centrifuge, and its max rotating speed is 3900RPM, with a VFD control panel, it could reach any speed from 0 to 3900 rpm. That’s why it is suitable for more than one applications in oil and gas drilling industry, including but not limited to following applications:
1. solids control centrifuge, even at a fixed speed, a suitable middle speed of GNLW363 could be used as a barite recovery centrifuge. And it is also be suitable for solids control use as the 4th phase treating equipments.
2. drilling waste management centrifuge, it is used after a high-G drying shale shaker or a vertical cuttings dryer, respectively for the water based mud and oil based mud, for separating out the extra fine particles from the drilling liquid.
3, dewatering centrifuge for treating the drilling liquid. When the drilling liquid recycled for several times, there could be more and more particles in the drilling mud, then we add some chemicals to flocculate the particles into bigger ones, big enough for the centrifuge, and GNLW363CG-VFD is suitable for this application.
4, the slurry or oily sludge separation, in some jobsite, the client use GNLW363CG-VFD for sludge separation and the performance is good.
For the same model GNLW363, GN has more than one models for option, there are fixed speed option, VFD controlled option and also economic configurations and highest configuration for option. Like the VFD control, GN has flame proof ones and positive pressurized control panels.
Welcome to contact us for more information.