Disk boot failure: Fix for Windows XP

Every time a computer is turned on, as part of the boot process the BIOS tries to find a bootable drive to continue the loading process by starting its first sector. However, if BIOS is unable to find a drive to boot from, then a “Disk Boot Failure” error screen is displayed and the boot process is halted.
The most common cause of this error is an incorrect order of boot devices in BIOS. Usually BIOS tries to find a bootable drive according to its boot device order, so if a PC has a floppy drive set to a higher priority than a hard drive, and there is a floppy disk inserted – then the PC tries to boot from a floppy disk, and a error message is displayed.
If doing so has not solved the issue, it is possible that your BIOS boot sequence is incorrect. To fix this, enter the BIOS setup and modify the boot sequence so that the PC gives preference to disk C: during startup.

You could also be seeing this message because you've recently installed a new hard disk. This is normal, and is easily repaired. You simply need to insert the system installation CD (usually Windows) into the PC, then reboot. When doing so, make sure that the CD-ROM drive is the first one in the boot sequence defined in the BIOS setup.
This message may also appear if your hard disk is offline. Open the Central Processing Unit (CPU) and verify that the power to the hard disk is connected and that the flat cable is sufficiently pressed on both sides.

You may also receive this error message if necessary system files have been corrupted or removed. To find out, start the PC with a system disk or the Windows installation CD-ROM (via the Recovery Console). When you have started, type "Dir C:" to see if you can access the contents of Disk C:. If it is possible, then entering the following code will rectify the issue:
When you boot your computer system, a disk boot failure error can appear on your Windows screen. This error message generally appears with a black screen and shows an error: “Disk Boot Failure, Insert System Disk & Press Enter“.

If you are also encountering this error message and unable to boot your OS then this article is for you. Here you will get the proper fixes to solve this disk boot failure error message along with other relevant information.
Disk boot failure is an error that prevents Windows to load properly. Whenever you boot your system you will face Disk Boot Failure error and avert you from booting into your PC/Laptop which shows that there is an issue either in the hardware or software.

This type of error message may also appear if there is a CD in the drive while booting the computer or when BIOS (Basic Input Output System) becomes unable to find the bootable drive to boot the computer.

When the Hiren menu appears, select Mini XP Mode and it will load. Finally, you should see the Windowsy desktop. You should be able to recognize this partand feel comfortable, but this is not your table - this is Shepard's table! Remember, you didn’t boot from your hard drive — you booted the Hiren desktop. One way to check your hard drive for errors is to open My Computer, right-click the appropriate drive and select Properties, Tools, Error Checking, Check Now. Check both boxes, then click Start.


Powered by GroupSpaces · Terms · Privacy Policy · Cookie Use · Create Your Own Group